Solar system: solar collector thermosyphon Altek SP-C-15

The main operational characteristics
Solar water heater is highly resistant to such weather phenomena as wind and hail and also severe temperature conditions (extreme high/low temperatures).
Prolonged maintenance of high temperature at the expense of greater thickness layer of the polyurethane foam, thus achieving a significant reduction in heat loss, the temperature can persist for more than 48 hours, and even after 100 hours, the water in the tank will still be warm.
Outer tank and frame products are subjected to anti-corrosion treatment.
Seal, silicone (silicone) rubber: non-toxic, odorless, helps to preserve cleanliness and maintain the high temperature water is characterized by a long-lasting durability.
Fully microprocessor control: easy-to-use computerized system control.
The salinity of the water through the system anode electrolytic cleaning from pollution (optional).
Specification
The tank system consists of two tanks the inner tank is inside the outer, the space between the walls filled with polyurethane foam for thermal insulation..
Inner tank: stainless steel SUS304-2B; thickness of 0.41 mm; Ø 360 mm.
Outer tank and frame:
Painted steel plate
Insulation layer: Polyurethane foam 50-100 mm.
The dimensions of the systems in the horizontal plane specified in the application.
Pressure systems are inside the tank of a tubular exchanger. The water inside the tank pressure of the system acts as a heat accumulator. Water for DHW is prepared in the internal heat exchanger in flow-through mode.

Specifications: